All tools
viewhub.stream · Engineering Tools

LED Filming & Camera Settings

Shutter, frame rate and refresh combinations that avoid banding and flicker when filming LED screens

LED Screen

Hz

Use the refresh rate (the PWM repeat rate) from the screen’s datasheet or controller. Typical values are 1,920 to 7,680 Hz.

Camera

°

A rolling shutter shows the problem as dark bands across the picture. A global shutter shows it as the whole picture flickering from frame to frame.

Banding Risk

–
 

Shutter Setting

–
 

Refresh Cycles Captured

–
 

Nearest Clean Shutter

–
 

Refresh Per Frame

–
 

Worst Row Difference

–
 

Banding Against Shutter Angle

Each dip to zero is a flicker-free shutter angle. The yellow marker is your current setting. Bands behind the curve show clean, slight, visible and severe banding.

Cleanest Settings Near Yours

Shutter speedShutter angleCyclesChange from yoursBanding

Common Shutter Speeds

Shutter speedAngle at this frame rateCycles capturedBandingResult