All tools
viewhub.stream · Engineering Tools

100V / 70V Line Designer

Add up speaker taps, check amplifier headroom, transformer loading and cable loss

Line & Amplifier

W
%

Headroom reserves amplifier power for peaks, ageing and future additions. 20 to 30% is common practice. Use the amplifier’s rated power at the line voltage, or into its low-impedance load when a step-up transformer is used.

Cable Run (optional)

m
%

Assumes copper conductors and worst case: every speaker at the far end of the run. Leave the length empty to ignore cable loss. 10% power loss is about 0.46 dB.

Speaker Taps

Speaker / zoneQtyTap (W)Transformer (W)TotalLoading

Set each speaker’s tap to the power you want it to draw. Enter the transformer’s rated power to check it is not overloaded (optional).

Total Tap Power

–
 

Amplifier Required

–
 

Amplifier Loading

–
 

Line Current

–
 

Cable Loss

–
 

Transformer Loading

–
 

Amplifier Power Budget

Cable Size Comparison

ConductorLoop resistanceVoltage dropPower lossLoss (dB)Status