All guides
viewhub.stream · How-to Guides

NovaStar Taurus Multimedia Players

Choose a TB series player, configure the screen, publish and schedule content, and manage players remotely

6 min readUpdated

Contents

Before you start

NovaStar's Taurus (TB series) multimedia players are small boxes that drive an LED screen and play content on their own, with no computer. They suit digital signage, shop windows, advertising screens, reception screens and installations where content is scheduled rather than switched live. Content can be loaded from a USB stick, a phone or tablet, a computer on the network, or managed for many screens from NovaStar's cloud platform. This guide explains how to choose a model, configure the screen, publish content and manage the players.

Model specifications and software change over time, so check NovaStar's current specification sheet for your exact model and keep the firmware up to date.

Choose a model

The range runs from single-port players for small screens to multi-port players with an HDMI input for larger screens. Two examples from each end of the range:

ModelEthernet outputsLoading capacityHDMI inputNotes
TB10 Plus1650,000 pixelsNoUp to 2,048 × 2,048, or ultra-long screens up to 8,192 wide. 32 GB storage, Wi-Fi.
TB6042.3 million pixelsYes (HDMI 1.4)Up to 4,096 wide or high. Asynchronous or synchronous mode, port backup, 4K H.265 playback.

The models in between (such as the TB20 Plus, TB30, TB40 and TB50) offer intermediate capacities, ports and inputs. Choose a model from:

  • The screen's total pixels and shape, within the loading capacity and the maximum width and height.
  • The number of Ethernet ports needed, at roughly 650,000 pixels per port.
  • Whether you need a live input. Players with HDMI input can switch to showing a live source (a laptop or set-top box) in synchronous mode.
  • Connectivity: wired network, Wi-Fi, and an optional 4G module for remote sites.
  • Sensors: brightness, temperature and humidity sensors connect directly for automatic brightness and monitoring.

Asynchronous and synchronous modes

A Taurus player taking content from the cloud, USB or a live HDMI source and driving an LED screen Cloud (VNNOX)ViPlex app or USBHDMI sourceTaurus playerLED screen schedules, many siteslocal publishingsynchronous modestores and playsEthernet
In asynchronous mode the player plays its stored content. In synchronous mode (models with HDMI input), it shows the live input instead.
  • Asynchronous mode: the player plays content stored in its memory, following the schedule you publish. This is how most signage runs.
  • Synchronous mode: the player shows its HDMI input live, like a sending card, for presentations or broadcast content. On some models the input is automatically scaled down to fit the screen.

Switch between them with the mode switch or button on the player, or in the software, depending on the model.

The software

SoftwareUse it for
ViPlex Handy (phone and tablet app)Connecting to a player over its Wi-Fi hotspot or the local network, configuring screen settings, and publishing content on site.
ViPlex Express (Windows)Creating content and schedules, publishing to players on the local network, and screen configuration.
VNNOX (cloud)Managing, scheduling and monitoring many players at different sites over the internet.
NovaLCT (Windows)Receiving card configuration, screen mapping, calibration and advanced settings.

Connect and log in

  1. Connect the screen to the player's Ethernet output(s), following your port plan, and power both up.
  2. Connect to the player. Each player creates its own Wi-Fi hotspot, usually named AP followed by the last eight digits of its serial number, with the password on the label (12345678 on some models). Join it with a phone or laptop, or connect the player to your network by cable and find it on the same network.
  3. Open ViPlex Handy or ViPlex Express and log in to the player. Change the default passwords for the hotspot and the player straight away.
  4. Set the time zone and time synchronisation (network time, or GPS with a 4G module), so schedules play at the right time.
  5. Connect the player to the internet by cable, Wi-Fi (station mode) or 4G if it will be managed from VNNOX. The player can keep its hotspot running at the same time on most models.

Configure the screen

  1. Load the cabinet configuration for your cabinets and send it to the receiving cards, then save it.
  2. Set the screen connection: the number of cabinets, how they are arranged on each port and the data direction. Simple screens can be set from ViPlex; irregular or complex screens are easiest in NovaLCT.
  3. Check the result with test patterns, and save to the receiving cards.
  4. Set the screen resolution in the player to match the screen exactly, so content is created and played at native resolution.

Create and publish content

Prepare the media

  • Make content at the screen's exact resolution. If the screen is 1,152 × 576 pixels, create videos and images at that size.
  • Use widely supported formats: MP4 with H.264 or H.265 for video, and JPG or PNG for images. Check the model's maximum decoding resolution and frame rate.
  • Keep files sensible: high bit rates do not look better on an LED screen and take longer to upload over Wi-Fi or 4G.
  • USB sticks must be formatted as FAT32 or ext4 (not exFAT). FAT32 limits files to 4 GB.

Build a solution

  1. Create a new solution (program) in ViPlex at the screen's resolution.
  2. Add pages, and on each page add windows for videos, images, text, clocks, weather, web pages or live streams.
  3. Set how long each page plays, its order and transitions.
  4. Set the schedule: which solutions play on which days and at which times.
  5. Publish to the player over Wi-Fi, the network, USB or VNNOX. The player stores the content and keeps playing it even if the connection drops.

The Digital Signage Playlist Calculator works out playlist lengths and how often each message appears. See Digital Signage Basics for content design advice.

Brightness, power and monitoring

  • Brightness: set it manually, by schedule (brighter by day, dimmer at night), or automatically from a light sensor. Outdoor screens must be dimmed at night.
  • Screen power schedule: turn the screen off out of hours to save power and extend its life. Players can switch power to the screen through a multifunction card or relay where fitted.
  • Monitoring: VNNOX shows each player's status, what is playing, screenshots, temperatures and faults, and can send alerts.
  • Ethernet port backup: on multi-port models, ports can be set as main and backup pairs, with a cable from the backup port to the far end of each chain.
  • Firmware: update players from ViPlex, VNNOX or a USB stick, and keep all players on a site at the same version.

Secure every player. Change default passwords, turn off the Wi-Fi hotspot when it is not needed, keep the firmware updated and place players on a separate network from office systems. A public screen showing unauthorised content is a serious embarrassment.

Troubleshooting

ProblemLikely causesThings to try
Screen black, player runningScreen settings not sent, no content scheduled, screen powered off by schedule, brightness at zeroCheck the schedule, brightness and power settings, show a test pattern, and resend the screen configuration.
Content in the wrong place or scrambledWrong screen resolution or connection settingsCheck the screen connection and resolution, and resend.
Content will not playUnsupported format or resolution, file too large, wrong USB formatConvert to MP4 (H.264) at the screen resolution, and format USB sticks as FAT32 or ext4.
Content plays at the wrong timeTime zone or time synchronisation wrongSet the time zone and network time synchronisation.
Player offline in VNNOXNo internet, wrong Wi-Fi details, 4G signal, firewallCheck the network connection on site, and that the firewall allows the player to reach the cloud service.
Cannot find the player's hotspotHotspot disabled, out of rangeConnect by network cable instead, or re-enable the hotspot locally.
Back to top