Before you start
An LED screen is a big investment, and most disappointments come from decisions made at the very start: a pixel pitch too coarse for the viewing distance, a screen far too bright (or not bright enough) for the space, a size that does not suit the content, or a structure and power supply that were never planned. This guide works through the decisions in order, so you can specify a screen with confidence or check a supplier's proposal.
- Define the job: what the screen shows, who watches and from where.
- Choose the size and shape to suit the content and the space.
- Choose the pixel pitch from the viewing distance and content.
- Choose the brightness and the LED technology.
- Check the specification: refresh rate, greyscale, cabinets, servicing.
- Plan the structure, power, data and control.
- Agree content, budget, warranty and support.
Define the job
- What will it show? Video and images forgive a coarser pixel pitch. Small text, spreadsheets, presentation slides and fine graphics need a finer pitch, or a larger screen.
- Who watches, and from where? Measure the closest and furthest viewing positions. A reception screen viewed from 2 m needs a very different pitch from a stadium screen viewed from 50 m.
- Indoors or outdoors? Outdoor screens need weatherproofing and much higher brightness. Indoor screens in sunlit atriums or behind windows sit in between.
- How long will it run each day? 24/7 screens need components rated for it, good ventilation and a plan for maintenance.
- Is it fixed or rental? Rental and touring screens use lightweight, quick-lock cabinets built to be handled; fixed installations can be slimmer, with front servicing.
- Will it be filmed? Broadcast, streaming and events with camera close-ups need high refresh rates and genlock. See LED Screens on Camera.
Choose the size and shape
- Match the content. Most content is 16:9. A 16:9 screen shows it full-frame, with no bars or cropping. Other shapes (very wide, tall or irregular) look striking but need content made for them.
- Work in whole cabinets. The screen's size is a multiple of the cabinet size. Popular sizes are 500 × 500 mm and 500 × 1,000 mm for rental, and 600 × 337.5 mm (a 16:9 cabinet) for fine-pitch indoor installations. Check a supplier's cabinet size gives the shape and resolution you need.
- Size for the furthest viewer. As a rule of thumb for presentation content, the screen height should be at least one-sixth of the distance to the furthest viewer, and more if they need to read small text.
- Mind the height. The bottom of the screen should clear the heads of a standing or seated audience, and the top should not force people at the front to crane their necks.
The LED Screen Size Recommender suggests a size for the room, the LED Screen Calculator works out the cabinet grid and resolution, and the Screen Sightline & Height Calculator checks the mounting height.
Choose the pixel pitch
Pixel pitch is the distance from the centre of one pixel to the next, in millimetres. A smaller pitch means more pixels in the same area, a sharper image close up, and a higher cost.
Rules of thumb
- Minimum viewing distance in metres ≈ pixel pitch in millimetres. A 2.5 mm screen looks smooth from about 2.5 m. Closer than that, people see individual pixels.
- Comfortable viewing distance ≈ 2 to 3 times the pitch, in metres. Most of the audience should be at least this far away.
- Small text needs more. For readable text, each character needs enough pixels: at least about 7 pixels high for basic numbers and capitals, and 15 or more for comfortable reading.
| Pitch | Typical use | Pixels per m² |
|---|---|---|
| 0.9 to 1.5 mm | Boardrooms, control rooms, broadcast studios, close-viewed retail | 440,000 to 1.2 million |
| 1.5 to 2.5 mm | Conference rooms, auditoriums, corporate foyers, houses of worship | 160,000 to 440,000 |
| 2.5 to 4 mm | Event stages, large auditoriums, indoor retail | 62,500 to 160,000 |
| 4 to 6 mm | Outdoor events, shopping centres, sports halls | 28,000 to 62,500 |
| 6 to 10 mm and above | Outdoor advertising, stadiums, roadside screens viewed from a distance | 10,000 to 28,000 |
The LED Viewing Distance & Text Size Calculator and LED Pitch Comparison compare pitches for your room and content.
Do not over-specify. A finer pitch than the audience can see costs more, uses more processing and needs higher-resolution content, for no visible benefit. Spend the difference on a bigger screen, better processing or spares.
Choose the brightness
Brightness is measured in nits (candelas per square metre). LED screens are far brighter than televisions, and most indoor screens run well below their maximum.
| Setting | Typical maximum brightness | Typical working brightness |
|---|---|---|
| Studio and filming | 800 to 1,500 nits | Often under 500 nits |
| Indoor: boardroom, auditorium, theatre | 600 to 1,200 nits | 150 to 500 nits |
| Indoor with daylight, retail, atrium | 1,500 to 2,500 nits | 800 to 1,500 nits |
| Behind a window facing outside | 2,500 to 4,000 nits | Daylight dependent |
| Outdoor in direct sun | 5,000 to 8,000 nits | Daylight dependent, much lower at night |
- Use a light sensor on screens that see daylight, so they brighten in sun and dim at night automatically.
- Dimming reduces greyscale. An indoor screen run at 10% of its maximum loses smooth shading in dark areas. A screen designed for indoor brightness, with good greyscale processing, looks better at low levels than an outdoor screen turned right down.
- Outdoor screens at night must be dimmed to avoid glare and light pollution. Planning conditions often set night-time limits; the Institution of Lighting Professionals' guidance on illuminated advertisements (PLG05) is widely used.
The LED Brightness & Contrast Calculator estimates brightness for the ambient light, and the LED Greyscale & Dimming Calculator shows how dimming affects greyscale.
LED technology
| Type | What it is | Things to know |
|---|---|---|
| SMD | Surface-mounted packages, each containing red, green and blue LEDs | The most common type. Good colour and viewing angle. Individual LEDs can be knocked off if handled carelessly. |
| GOB (glue on board) | SMD with a protective resin coating over the surface | Tougher against knocks, dust and moisture, useful for rental and floors. Slightly less contrast on some products. |
| COB (chip on board) | LED chips bonded directly to the board and sealed under a flat coating | Very robust, high contrast, smooth surface, and suited to fine pitches. Repairs are module-level rather than individual pixels. |
| DIP | Separate through-hole red, green and blue LEDs | Very bright and durable, used for coarse-pitch outdoor screens. Narrower viewing angle. |
| MIP and micro LED | Very small LED chips in tiny packages or directly on the board | The finest pitches and highest contrast, at a premium price. |
Check the specification
| Specification | What to look for |
|---|---|
| Refresh rate | How many times a second the LEDs are refreshed. 1,920 Hz is the minimum for general use; 3,840 Hz or more for anything filmed or photographed. See the LED Refresh Rate & Scan Checker. |
| Greyscale (bit depth) | How many levels of brightness each colour can show: 14 to 16 bits gives smooth gradients and dark detail. |
| Contrast and surface | A black LED face and mask give deeper blacks, especially in lit rooms. |
| Viewing angle | Typically 140 to 160° horizontally. Check colour stays even towards the edges. See the LED Viewing Angle Coverage tool. |
| Cabinet flatness and seams | Fine-pitch screens need precise cabinets and fine adjustment, or seams show as dark or bright lines. |
| Servicing | Front service (modules removed from the front with magnets or a tool) suits walls with no rear access. Rear service needs a gap behind the screen. |
| IP rating | Outdoor screens need at least IP65 at the front, and a suitable rating at the rear for their location. |
| Weight | Determines the structure. See the LED Weight & Rigging Calculator. |
| Power | Maximum and typical (average) power. Average is often a third or less of maximum with normal content. See the LED Power & Heat Calculator. |
| Calibration | Factory calibration of each module, and whether calibration data is stored on the module so spares match. |
Structure, power, data and control
Structure
- Every fixed screen needs a structure designed for its weight, and outdoor screens for wind loading. Have it checked by a structural engineer, especially on walls, roofs and suspended screens. The LED Screen Wind Load Calculator gives an early estimate.
- Allow access for installation and servicing: a service walkway behind rear-service screens, or clear floor space in front of front-service screens.
- Allow ventilation, especially for screens in enclosures or recesses. Heat must be able to escape.
Power
- Size the supply for the maximum power, with dedicated circuits, and plan how cabinets are daisy-chained onto each circuit.
- LED power supplies draw a surge at switch-on and have some earth leakage, so spread the load over enough circuits and choose protective devices accordingly. Get an electrician involved early.
- Consider a controlled power-on sequence for large screens, and a UPS for the processor and control equipment.
Data and control
- Choose the processor or controller from the screen's resolution, the number of Ethernet ports needed and the inputs and features required. See How to Configure a NovaStar VX Pro Processor and NovaStar Taurus Multimedia Players.
- Plan the data cable runs, with fibre for distances over about 100 m.
- Decide how content gets to the screen: a live source (laptop, media server, switcher), a built-in media player, or a cloud content management system.
Content, budget and support
- Make content at the screen's native resolution and give the exact pixel size to everyone producing content. The Content Scaling Calculator helps where content and screen differ.
- Budget for everything: the screen, processor, structure, power, installation, content, spares, maintenance and, for outdoor screens, planning consent.
- Buy spares at the same time as the screen: modules, receiving cards and power supplies from the same production batch, so colours match. The LED Spares Planner suggests quantities.
- Agree the warranty and support: how long, what is covered, how quickly faults are fixed and who does it.
- Outdoor advertising screens normally need advertisement consent from the local planning authority. Check early.
Specification checklist
- Purpose, content type and viewing distances defined
- Size, aspect ratio and resolution agreed, in whole cabinets
- Pixel pitch justified by the viewing distance and content
- Brightness suited to the ambient light, with a light sensor where needed
- Refresh rate and greyscale suitable, especially if filmed
- Servicing access, IP rating and weight confirmed
- Structure designed and checked, ventilation allowed for
- Power supply, circuits and protective devices agreed with an electrician
- Processor, inputs, data routes and content workflow chosen
- Spares, warranty, support and any planning consent arranged