Before you start
Streaming an event lets people watch from anywhere, but the online audience is less forgiving than the people in the room. They will tolerate a simple picture, yet leave quickly if the sound is poor, the stream keeps buffering, or the start is late and silent. A reliable stream comes from planning: a dedicated audio mix, a solid internet connection, a tested signal chain and a plan for when things go wrong. This guide covers streaming conferences, services, concerts, sports and meetings, from a single camera to a multi-camera production.
- Plan the stream: audience, platform, permissions and the running order.
- Check the internet connection and plan a backup.
- Choose cameras, a switcher and an encoder.
- Build a dedicated audio mix for the stream.
- Prepare graphics, holding slides and titles.
- Test end to end, then run the stream and record it.
Plan the stream
- Who is watching, and on what? A public stream on YouTube or Facebook, a private stream for staff, a paid stream, or a hybrid meeting in Teams or Zoom where remote people also speak. This decides the platform.
- Platform settings: create the event in advance with a title, description and thumbnail, set whether it is public, unlisted or private, and enable DVR (rewind) and recording if wanted. Share the link early.
- Permissions: tell speakers and attendees the event is being streamed, with notices at the entrance. Get written consent from speakers and performers, and take extra care with children and vulnerable people: agree in advance who can be shown.
- Music and copyright: streaming recorded music, or live performances of copyright songs, needs the right licences. Without them, platforms may mute or stop the stream. Check with PRS for Music and the platform's rules, and avoid recorded background music during breaks unless you are licensed.
- Running order: start and end times, speakers, videos, breaks and who cues what. Start the stream 10 to 15 minutes early with a holding slide and music, so viewers can join.
Check the internet connection
The upload speed of the internet connection is the most common point of failure.
- Measure the upload speed at the venue, at the time of day of the event, on the actual connection you will use, several times.
- Allow double the stream's bit rate. A 1080p stream typically runs at about 4 to 10 Mbps, so you want at least 10 to 20 Mbps of dependable upload, more if you also send a backup stream or run a video call.
- Use a wired connection to the encoder, never venue Wi-Fi. Ask the venue for a dedicated line or a separate network that the audience and staff will not share.
- Have a backup: a bonded cellular unit, a 4G or 5G router, or a second internet line, ready to switch to.
- Check the firewall: venue networks sometimes block streaming protocols. Test with the actual platform beforehand.
The Video Bandwidth & Storage Calculator works out the bit rate and recording size for your settings.
Cameras, switching and encoding
Cameras
- One camera on a tripod, framed on the speaker or stage, is enough for many events. Lock off exposure, focus and white balance so they do not drift.
- Two or more cameras give a wide shot and a close-up, and make the stream far more watchable. PTZ (pan, tilt, zoom) cameras can be controlled remotely by one operator.
- Frame rate: use 25 or 50 frames per second in the UK, matched across every camera and the switcher, to avoid flicker from lighting and LED screens. See LED Screens on Camera.
- Lighting: speakers need light on their faces. Stage lighting that looks fine to the room may be too dim or contrasty for cameras.
Switching
- A hardware switcher (vision mixer) cuts between cameras and slides, adds titles and often streams and records directly.
- Software such as OBS Studio or vMix on a capable computer does the same, with capture devices for the camera inputs.
- Take a clean feed of the slides from the presentation laptop or the screen's source, not a camera pointing at the screen, so online viewers can read them.
Encoding
- Resolution and bit rate: 1080p at 25 or 50 fps is the norm, at a bit rate within your upload speed. Use the platform's recommended settings, usually H.264 video and AAC audio, with a keyframe every 2 seconds.
- Stream keys are passwords: keep them private, and use a new key for each event where the platform allows.
- Record locally at higher quality as well as streaming, for editing and in case the stream fails.
- Backup stream: some platforms accept a second, backup stream from another encoder or connection, which takes over if the main one drops.
Build a dedicated audio mix
Audio makes or breaks a stream. The mix that sounds right in the room is rarely right for the stream: in the room, loud instruments and voices are heard directly, and the PA only fills in. Online viewers hear only what you send them.
- Use a separate mix from the mixing desk (a matrix or auxiliary output) for the stream, so you can balance it independently of the room.
- Include everything: every microphone, video playback, presentation audio, and any remote participants.
- Add ambience: one or two audience microphones, blended in gently, so laughter, applause and singing are heard.
- Control the level: use a compressor and a limiter on the stream mix, so quiet speakers are audible and nothing distorts. Aim for a consistent loudness, roughly in line with other online content (around −16 to −14 LUFS integrated is common).
- Monitor on good headphones, listening to the stream mix itself, and ideally to the actual stream on a second device, a little delayed.
- Keep audio and video in sync: video processing adds delay, so the sound often arrives early. Add audio delay in the switcher or encoder until lips match.
- Connections: use a balanced line output from the desk into the switcher or an audio interface, and set levels so peaks stay well below clipping.
How to Set Up a Digital Mixer explains matrix and auxiliary outputs, and Audio Basics explains compressors and limiters.
Graphics and holding slides
- Holding slide before the start ("We'll be starting shortly"), with gentle licensed music.
- Break slide with the time the event will resume.
- Lower thirds with each speaker's name and role.
- Technical difficulties slide ready to put up if a camera or source fails.
- End slide with thanks and where to find the recording.
- Captions: enable the platform's automatic captions or use a captioning service, for accessibility.
Design graphics at 1,920 × 1,080, with text large enough to read on a phone, and keep them inside the safe area away from the edges.
Test end to end
- Rehearse the day before if you can, with the actual cameras, laptop, audio feed and internet connection.
- Run a private test stream to the actual platform (unlisted or private), and watch it on a phone on mobile data, as viewers will.
- Check audio from every source, including videos and remote participants, and audio sync.
- Check the slides are readable on a phone.
- Test the backup internet by switching to it.
- Start early: go live with the holding slide 10 to 15 minutes before the start.
- Watch the stream health during the event: the encoder's dropped frames and the platform's stream health page.
- Have a comms plan: how the stream operator talks to the stage manager and the sound engineer, and who decides to switch to backup.
Streaming checklist
- Platform event set up, link shared, stream key ready
- Consent, filming notices and music licences sorted
- Upload speed measured, wired connection and backup ready
- Cameras framed, exposure, focus and white balance locked, all at 25 or 50 fps
- Clean slide feed into the switcher
- Stream audio mix with compression, limiting and audience ambience
- Audio sync checked
- Holding, break, difficulties and end slides loaded, lower thirds ready
- Local recording running
- Test stream watched on a phone
Troubleshooting
| Problem | Likely causes | Things to try |
|---|---|---|
| Stream buffers or drops | Upload speed too low or unstable, Wi-Fi, shared network | Lower the bit rate, use a wired or dedicated connection, switch to the backup. |
| Encoder shows dropped frames | Network dropping (network frames) or computer overloaded (rendering or encoding frames) | Reduce the bit rate for network drops; reduce resolution or effects, or use hardware encoding, for computer overload. |
| No audio on the stream | Audio input not selected or muted in the switcher or encoder, no feed from the desk | Check the meters at each stage from the desk to the encoder. |
| Audio distorted | Level too high into the switcher or encoder | Lower the desk output or the input gain, and use a limiter. |
| Speakers quiet, applause very loud | Stream mix not compressed, audience microphones too high | Compress the stream mix and lower the ambience. |
| Lips out of sync | Video delay through cameras and the switcher | Delay the audio in the switcher or encoder. |
| Flicker or banding on camera | Frame rate not matched to the lighting or LED screens | Use 25 or 50 fps and matching shutter speeds. |
| Stream muted or blocked by the platform | Copyright music detected | Use licensed or royalty-free music, and check the platform's rules. |